Preventing deformation of Aluminum Veneer Curtain Wall during installation is an important part of ensuring the flatness and safety of the curtain wall. The following are key measures to prevent deformation of Aluminum Veneer Curtain Wall during installation:
1. Material selection and quality control
High-quality materials: Select high-quality aluminum alloy plates that meet industry standards to ensure that the material has good anti-deformation ability.
Reinforcement rib setting: Reinforcement ribs must be installed on the back of large aluminum veneers to increase the strength and rigidity of the panel surface. Generally, aluminum veneers with a width of less than 60 are recommended to install reinforcement ribs.
2. Preparation before installation
Inspection and adjustment: Before installation, check the size, shape and surface quality of the aluminum veneer and its accessories to ensure that there is no bending, deformation or damage.
Frame installation: Ensure that the frame is installed flat and the spacing deviation is controlled within the allowable range to provide stable support.
3. Precautions during installation
Orderly installation: Install according to design requirements and construction sequence to avoid forced insertion or distortion of aluminum veneers.
Size adjustment: Once the size of the aluminum veneer is found to be deviated, it should be adjusted first to ensure orderly insertion.
Fixing method: The aluminum veneer must be fixed by pressing at a fixed distance to ensure the flatness of the curtain wall surface and avoid deformation caused by inconsistent force on each fixing point of the plate.
IV. Maintenance and inspection after installation
Reinforcement treatment: Large lamps, exhaust fans, etc. should not be placed directly on the flat roof of the aluminum veneer. Hangers should be installed separately and the parts where these equipment are installed should be reinforced.
Regular inspection: Regularly inspect the installed Aluminum Veneer Curtain Wall to detect and deal with deformation problems in time.
V. Summary
Preventing the deformation of the Aluminum Veneer Curtain Wall during installation requires starting from material selection, preparation before installation, precautions during installation, and maintenance and inspection after installation. By strictly following the construction specifications and operating requirements, the risk of deformation of the Aluminum Veneer Curtain Wall can be minimized to ensure the flatness and safety of the curtain wall.
